Manufacturer of screw driver (screwdriver), steel measuring tape, fibre glass tape, aluminum spirit level and Ultrasonic Distance Meter
   
         
 
 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Plier, Stripper & Cutter



Item: JRF-PC-202 - PVC Pipe Cutter


MODEL SPEC QUANTITY PER
CARTON (PCS)
G.W/N.W (KG) PACK.DIEM
(CM)
JRF-PC-202 42MM 1 5/8" 48 24.5/23 65.5X36.5X31
JRF-PC-202 42MM 1 5/8" 50 25/24 73X33X32.5

Tools For The Proffssional
Revoke Quickly Use For Convenient
USE:
Apply to Water Pipe, Aluminum Plastics Pipe, Gas Pipe, Electrical Appliance pipe and other plastics pipeline. (Not to be applied on electric cable line cable line and steel pipe)
Abllty of cut off:

Normal pipe VP30
Water course pipe VW30 Scope of out 42mm
Electrical appliance pipe VP36

[Attention]
When product used in winter,The pipe would be put in the Lukewarm water for
heating ar first.to avoid burst because for cold and fragile at cutting.If the
edge of a cutter appeared wear and teer atusing.loose the fixed screw and buy
the same type of pipe blade for change after using,we should push down the handle and spread on rustproof oil.Product apply to rigid plastics pipe or Aluminum plastics pipe,but not to be applied on electric cablelie and steel pipe to avoid to cause cutter damaged seriously.


High Quality Blade
3 times longer life



[Substitute]
[The Pipe Blade]:


When the blade is not very sharp,take down two pieces of fixed screw at two side of pipe blade to substitute for new pipe blade of the same type.

Method of use as follow:
1.Press the open button with thumb.according to the picture1.
2.Put the pipe diameter below42mm in cutter,push down handle
repeatedly,forthwith cut off.
3.After cutting,clean the blade with rustproof oil.close the handle for ready use nest time.

 
© 2003 Eastern Tape Measure